Issuing access control cards or smart cards with embedded chips? You may have noticed a common problem: "white spots" or faded print areas near the chip. This happens because the chip creates a slight bump on the card surface, and standard Direct-to-Card (DTC) printheads cannot reach the "valleys" around it. The solution is the Evolis Agilia Retransfer Printer.
The "Over-the-Chip" Solution
The Agilia uses retransfer technology, which means the printhead never touches the card directly. Instead, it prints on a flexible film that is then bonded to the card. This film easily conforms to the uneven surface of Contact Smart Cards (with gold chips) and Contactless RFID Cards (with internal antennas).
Protect Your Printhead
Printing directly on rigid smart cards can damage sensitive DTC printheads, leading to expensive repairs. The Agilia’s retransfer process eliminates this risk, making it a rugged choice for high-tech issuance.
Full Coverage, Zero Compromise
With Agilia, your design covers the entire card, right up to the edge of the contact chip or the physical card edge. You get a flawless, professional finish every time, regardless of what technology lies underneath.
Print Flawless Smart Cards with Agilia
Contact us to find out more!
